1.Power
6V, four AA（1.5V）Alkaline batteries.
2.Low Battery
2-1 The batteries should be changed immediately once you see button1 flashes in red
and hear when press programming button.
2-2 All settings are retained in the memory and will not be affected even if the battery
is completely dead.
2-3 The lock still can be operated by key even there is a power outage.
3.Illuminated Indicator
3-1 Button1 flashes in green once when successful operation.
3-2 Button1 flashes in green twice when successful programming.
3-3 Button1 flashes in red 3 times when there is an operation error.
3-4 Button1 flashes in red 5 times when codes input error, the system will shut down
for system protection (Refer to 17).
3-5 Button1 flashes in orange 3 times when system has been restored to default setting.
3-6 Button1 flashes in orange slowly while in programming mode.
4.Audible Indicator
4-1 1 beep sound indicates a successful operation.
4-2 2 long beeps indicate a successful programming
4-3 3 beeps indicate an operation error.
4-4 3 long beeps indicate that system has been restored to default setting.
4-5 5 beeps when codes input error, the system will shut down for system protection.
(Refer to 17)
4-6 10 rapid beeps indicate the power of battery is low.
5.Programming Code
5-1 The preset Programming Code is 0000. Please change it into new one when first
time operation.
5-2 Only one set of Programming Code for function setting.
5-3 Programming Code is only for function setting, you can't unlock the lockset by
entering Programming Code.
5-4 Programming Code is 4-10 digits in length.
5-5 Programming Code can be changed anytime if needed.
10 rapid beep sounds
■
Specification/Function
6.User Code
6-1 The preset User Code is 1234. Please delete it and create new one when first time
operation.
6-2 Up to 6 sets of User Codes can be saved.
6-3 User Code is only for unlocking the lock, without programming function.
6-4 User Code is 4-10 digits in length.
6-5 User Code can be deleted or added anytime if needed.
7.Delete Individual User Code
7-1 User Codes can be deleted individually. You can re-set the same number as code
even it's deleted before.
7-2 Programming Code is needed when deleting individual User Code.
8.Delete All User Codes At Once
8-1 All the User Codes can be deleted at once. You can still reset the same numbers as
codes even they're deleted before.
8-2 Auto-locking and Keypad locking function will be invalid after deleting all User
Codes and the lock can only be operated by key. These functions will be restored
when recreate new User Codes.
8-3 Programming Code is needed when deleting all User Codes.
9.Temporarily Disable All User Codes
9-1 Auto-locking and Keypad locking function will be invalid when User Codes are
temporarily disabled. The lock can only be operated by key during the time.
9-2 Repeat the programming steps again to restore the auto-locking, keypad locking
function and User Codes.
10.Create a Disposable User Code
10-1 Disposable User Code will be no longer valid once being used.
10-2 You can reset same number as Disposal User Code again.
10-3 Programming Code is needed when creating a Disposable User Code.
11.Restore Preset Factory Code
11-1 You can restore Preset Factory Code by pressing “R” button on the interior receiver
module when you forget Programming Code or you want to cancel all previous
setting.
11-2 After restore, the Programming Code would be 0000; the User Code would be
1234 again.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern