Lockstate LS-RDJ Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für Zuhause Lockstate LS-RDJ herunter. LOCKSTATE LS-RDJ User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 3
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
The LS-RDJ comes standard with the
following features:
1 unique master code
9 unique user codes
Low Battery Alarm
External power capability
Manual override keys
Tamper-proof error function
Easy installation
1. INSTALLATION
1.1 Lock Diagram
Below is a diagram of the LS-RDJ with
numbers indicating areas of function. These
numbers correspond with their description in
the box below:
1.2 Door Diagram
If you are installing the LS-RDJ in a
door with pre-drilled holes, the lock
will fit most standard doors. To
confirm that the lock will fit your door,
please verify the following
measurements:
1. Backset is either 2 3/4” or 2 3/8”
(backset is the measure from the edge of
the door to the center of the knob hole)
2. Door knob hole is 2 1/8”
3. Latch Hole is 7/8”
(see figure below)
1.3 Installing the Batteries
The battery case is located in the lower
half of the outside lock piece.
Remove the battery case by inserting
the small green screw driver through
the bottom hole of the back side of
the front mount (see below). As you
press the screw driver through the
hole the case will release from the
bottom of the mount. Place 4 AA
batteries in the case and replace the
case in the mount.
Fig. 1
1
Handle (Left handle or Right handle)
2
"S" key (setup key) for setting new codes
3
Green light indicating the lock is open
4
Socket for external power (6V)
5
Red light indicating the lock is not open
6
Digital keypad (digits 0-9)
7
"ON" key used for unlocking the lock
8
Emergency manual keys
Seitenansicht 0
1 2 3

Inhaltsverzeichnis

Seite 1

The LS-RDJ comes standard with the following features: • 1 unique master code • 9 unique user codes • Low Battery Alarm • External power capabilit

Seite 2

1.4 Installing the Lock Place the latch through the latch hole positioned correctly for latching your door. Leave the latch loose until both the fr

Seite 3

2.3 Canceling and Resetting Codes In order to cancel ALL existing user codes, enter the existing master code and then press the “ON” button. After y

Kommentare zu diesen Handbüchern

Keine Kommentare