Lockstate LS-60 Installation Guide Bedienungsanleitung PDF herunterladen (Seite 7)

PG 7

Mount the LS-60 to Wall

1. Hold the LS-60 against the wall, with the wires coming over the top;

above terminal block. The LS-60 will cover the hole in the wall.

2. Position LS-60 for best appearance.

3. Attach the LS-60 to the wall with the screws provided.

4. If you are mounting the LS-60 to sheet rock or if you are using the

old mounting holes, use the plastic anchors provided.

5. Mark ﬁrst and drill a 3/16-in.(4.8mm) hole for the insert at each

screw location, then mount the unit.

Screw to wall

Place wires like this

from

HEAT/COOL

system

Wall

Wires

Wall

anchor

LS-60

1 2 3 4 5 6 7 8 9 10 11 12 ... 17 18

Keine Kommentare

Lockstate LS-60 Installation Guide Bedienungsanleitung Seite 7