LockState LS-19EPL Bedienerhandbuch PDF herunterladen

www.LockState.com

OPERATING INSTRUCTION for LockState Safe LS-19EPL

CAUTION: Do not keep the keys in the safe.

1. OPENING THE SAFE THE FIRST TIME

Use a screw driver to pry off the round plastic cover situated to the right of the keypad (see

“A” in diagram 1), exposing the keyhole underneath. Insert the key into the keyhole and turn

it clockwise to retract the bolts and open the safe door. You can follow these steps to

manually open your safe anytime. Note that the motor will NOT work when the override key

is in the keyhole and the safe is in the UNLOCKED status. In this case, the LED display will

read ‘Error’. To remove the override key, with the door open turn the key counter-clockwise

and take it out.

2. INSTALLING THE BATTERIES

The safe requires 4× size “AA” (1.5V) batteries. To install the batteries, open the safe,

remove the battery cover plate on the back of the door (“A” in Diagram 2) and install the

batteries. Make sure the batteries are inserted with the correct corresponding polarity. Use

of alkaline batteries is recommended.

3. PROGRAMMING THE CODE

All safes are supplied with the factory preset master code ‘888888’. After inserting the

batteries, you can open the safe with this master code by entering ‘888888’ and then

pressing the ‘E’ key. The door will automatically open.

Programming a new master code

A. With the door either open or closed, press the ‘0’ key 2 times then press the ’E’ key. The

display will read ‘SELECT’.

B. Now press the ‘1’ key and the display will read ‘OLD’

C. Enter the master code that was previously programmed (for new safes this code is

‘888888’) and press the ‘E’ key. The display will read ‘SET’.

D. Enter a new Master code (a minimum of 3 digits and maximum of 6 digits) and press the

“E” key. The display will read ‘REPEAT’.

E. Again enter the new master code and press the ‘E’ key. The display will read ‘DONE’

and your new master code is set.

Programming the user code/Locking the door

A. With the door open, enter a user code (a minimum of 3 digits and maximum of 6 digits).

B. Now push the door shut (locking bolts are still unlocked) and hold the door closed while

pressing the ‘E’ key. You will hear the locking bolts lock the door automatically indicating

that your new user code has been programmed.

NOTE: While the master code remains set until it is changed using the master code change

procedure, the user code will automatically be deleted if the safe is opened even one time

with the user code.

Thank you for purchasing the Lockstate LS-19EPL hospital safe. This safe will install easily

on floors, walls, or in closets. This easy quick-start quide will help you through the installation

and programming process.

1 2 3

Diagram 1 3
Diagram 2 3

Inhaltsverzeichnis

Seite 1

www.LockState.com OPERATING INSTRUCTION for LockState Safe LS-19EPLCAUTION: Do not keep the keys in the safe. 1. OPENING THE SAFE THE FIRST TIME U

Seite 2

4. OPENING THE SAFE Enter either the user code or the master code and press the ‘E’ key. The door will be automatically open. NOTE: If 3 attempts

Seite 3 - Diagram 2

Diagram 1 Diagram 2

Kommentare zu diesen Handbüchern

Keine Kommentare

LockState LS-19EPL Bedienerhandbuch

Stöbern Sie online oder laden Sie Bedienerhandbuch nach Nein LockState LS-19EPL herunter. LockState LS-19EPL Instructions / Assembly Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein LockState LS-19EPL